I have been using the Elecraft KPA-500 and KAT-500 with two Icom rigs; the IC-7600 and the IC-7300. This article details how I have chosen to interconnect the KAT/KPA-500 with my IC-7300. There are many options for interconnecting the 7300 with this Elecraft "power combo." There also many opinions on the various wiring approaches. A... Continue Reading →
ICOM IC-7600 (or 7610) Wiring for use with Elecraft KPA/KAT-500 Power Combo
Note - While this Post documents my IC-7600 setup, I believe this will work equally well with the IC-7610 but I do not have one to test. If anyone can provide confirmation or feedback, it would be appreciated. I have had the IC-7600 for about 4 years and have now added the Elecraft KAT-500 Antenna... Continue Reading →
Your Elecraft KAT-500 Tuner Protects your KPA-500 Amp – until it doesn’t – UPDATED 10/30/2019 and 10/19/2020
I have been using an Elecraft KPA-500 linear amplifier and a KAT-500 Antenna tuner with my Icom radios (mostly the IC-7600 and briefly with the IC-7300) After much research and discussion, I figured out what I thought was the best way to interconnect the IC-7600 with the KAT/KPA-500 so that the Amp would be protected... Continue Reading →
Can’t Use TUNE Button on IC-7300 with KAT-500 Tuner
When I initially connected my IC-7300 to my Elecraft KAT-500 Antenna Tuner, I was unable to get the Tuner to start Tuning the KAT-500 from the TUNE button on the front panel. Here is what I discovered: I was using separate 12 volt power from my Station power supply for the Tuner. Only the Tune... Continue Reading →
Using the KAT-500 and KPA-500 with Icom Radios: Part II – Updated 2 AUGUST 2020
I have continued to investigate the various ways to connect my Icom IC-7300 or IC-7600 to the Elecraft KAT/KPA-500 Tuner and Amplifier. I have received some very helpful communication from a number of other Hams using Icom Radios with the Elecraft KPA-500 Amplifier and KAT-500 Tuner. It appears that there are several different ways to... Continue Reading →
Using the Elecraft KPA-500 and KAT-500 with Icom Rigs: Part I
I now have the Elecraft KAT-500 Antenna Tuner and the KPA-500 Linear Amplifier. My rigs are not Elecraft, but Icom (7600 and 7300) and Yaesu (FTDX-3000). I want to setup the Station to use the Elecraft components with my non-Elecraft transceivers. Since the KAT-500 has connections for the Icom AH-4 antenna control interface, I will... Continue Reading →