I had a great time working the ARRL CW November Sweepstakes contest this year. I know that many Hams do not care for SS with the long, complicated exchange but I think it is a great challenge. After many years of trying and hoping, I finally managed to work all 84 Sections for the "Clean... Continue Reading →
Added an Audio Mixer to My Shack
I was starting to get overwhelmed by all the audio sources in my shack, then I saw some contests are starting to require recordings of both sides of contacts. How the Hell am I going to do that??? So I started looking at options and thinking about the audio routing in my shack. I have... Continue Reading →
VA QSO Party 2022 – Reflection
The 2022 Virginia QSO Party took place in early March. Now that the dust has settled, I wanted to post a summary of my planning and activity in the contest. The short summary is that 2022 was a great year to participate in VAQP. Activity levels were high and the Band conditions were mostly favorable.... Continue Reading →
An SO2R Antenna Switching Project using N1MM
I have decided to revive a project that I started over a year ago, but had put on hold. My Station is setup for SO2R operation but I do not have automated antenna switching in place. I have 3 or 4 antennas, depending upon the contest, and manually connect and disconnect them as the contest... Continue Reading →
HAPPY NEW YEAR with high hopes for 2022
Happy New Year and thanks for the interest in this blog in the past year. In 2021 I had about 17,000 visits and 26,000 views of this blog. This may not be a large number for some more serious bloggers, but it is way above anything I ever expected to see. I hope to post... Continue Reading →
Connecting an IC-7300 to the Elecraft KPA-500 Amp and KAT-500 Tuner
***** Important Update with WARC Band Warning (at end of Post) ***** I have been using the Elecraft KPA-500 and KAT-500 with two Icom rigs; the IC-7600 and the IC-7300. This article details how I have chosen to interconnect the KAT/KPA-500 with my IC-7300. There are also varying options for interconnecting the 7300 with this... Continue Reading →
IC-7300 Firmware Upgrade to V 1.40
I see that ICOM just released a new Firmware upgrade for the IC-7300. This is Version 1.40 and it has some good looking upgrades to the Waterfall and the scope display, among other things. I also like the added ability to customize some of the Front panel control functions. I am going to go through... Continue Reading →
IC-7300 “SEND” signal – Be Careful when using it
There has been an ongoing discussion for quite some time about a reported "RF Tail" on the IC-7300. This report is based upon the fact that the 7300 provides a SEND signal that is supposed to be useful for telling offboard equipment if the 7300 is currently Transmitting or Receiving. Actually there are two of... Continue Reading →
IC-7600 RTTY Settings for MMTTY
I have posted these before, but people keep asking about the settings to use for RTTY on the IC-7600 with MMTTY. So this post provides my latest settings. This article provides my latest MMTTY settings screenshots. I am using it with N1MM+ Contest Logger. If you are having trouble using MMTTY with another program (N1MM+... Continue Reading →
A Dipole that Covers the Entire 80 Meter Band with SWR less than 3:1 – UPDATED 11/8/2025
11/8/2025 update - Found a very good Link from W4RNL (SK) discussing this broadbanding approach. He is my favorite source for practical antenna information. In his article, he gets into the details and performs some modeling of this approach to broadbanding dipole antennas. you can find his research here Many Hams use wire antennas, and... Continue Reading →
Kg3v Ham Radio Blog 